LG L1950S-SN User Guide - Page 23
CAUTION, Installing the HP Quick Release
View all LG L1950S-SN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3. Place the optional HP Quick Release onto the back of the monitor. Line up the holes on the HP Quick Release with the mounting holes on the back of the monitor. Figure 3-15 Mounting the HP Quick Release 4. Insert four screws into the mounting holes and tighten. 5. Mount the HP Quick Release to a swing arm or other mounting fixture using the four screws removed from the back of the monitor in the previous step. Figure 3-16 Installing the HP Quick Release CAUTION: The HP Quick Release is designed to support a maximum of up to 24 lbs. (10.9 kg). If you are mounting to a wall, HP recommends that you consult with a qualified engineering, architectural, or construction professional to determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that the mounting solution is properly installed to support applied loads. Removing the Monitor Pedestal Base 17