LG LMHM2017ST Installation Instructions - Page 2

Your Safety - microwave installation instructions

Page 2 highlights

YOUR SAFETY FIRST BEFORE YOU START • Proper installation is the installer's responsibility! - Read the entire manual before you begin. The Model number label is located on the front of oven, behind doon See Figure 1. Mounting plate is located on back side of microwave oven. See Figure 2. BE SURE TO READ THE FOLLOWING SAFETY iNSTRUCTiONS: Model Number Plate Mounting Plate Model Number Plate Figure 1 Mounting Plate Figure 2 AWARNINGA For Your Safety • This oven should not be installed or located by anyone except properly qualified service personnel. • You will need TWO people to install this oven. It is heavy and could cause personal injury if not handled properly. • Avoid Electrical Shock! - Before you drill into the wall, note where electrical outlets are and where electrical wires might be behind concealed in the wall, YOU COULD RECEIVE AN ELECTRICAL SHOCK if you contact electrical wires with your drill bit. - Locate and disconnect the power of any electrical circuits that could be affected by installing this oven. IF YOU DO NOT DISCONNECT THE POWER, YOU RECEIVE AN ELECTRICAL SHOCK. • ELECTRICAL RATING OF THIS OVEN : 120V AC. 60Hz. - You need a 120V, 60Hz, AC only, 15A or 20A, fused electrical supply (located in the cabinet above the microwave as close as possible to the microwave circuit) serving only the microwave.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

YOUR SAFETY
FIRST
BEFORE
YOU
START
• Proper
installation
is
the
installer's
responsibility!
-
Read
the
entire
manual
before
you
begin.
The
Model
number
label
is
located
on the
front
of oven,
behind
doon
See
Figure
1. Mounting
plate
is
located
on back
side
of microwave
oven.
See
Figure
2.
BE
SURE
TO READ
THE
FOLLOWING
SAFETY
iNSTRUCTiONS:
Model
Number
Plate
Model Number Plate
Mounting Plate
Mounting
Plate
Figure 1
Figure
2
AWARNINGA
For
Your
Safety
• This oven
should
not
be
installed or located
by
anyone
except
properly
qualified
service
personnel.
• You
will
need TWO
people
to
install
this
oven.
It
is
heavy
and could
cause
personal
injury if
not handled
properly.
Avoid
Electrical
Shock!
-
Before you drill into the wall, note where electrical
outlets are and where
electrical wires might be behind
concealed
in the wall, YOU COULD
RECEIVE
AN
ELECTRICAL
SHOCK
if you contact
electrical
wires with
your
drill bit.
-
Locate and disconnect
the power of any electrical
circuits that could be affected by installing
this oven.
IF YOU DO NOT DISCONNECT
THE POWER,
YOU RECEIVE
AN
ELECTRICAL
SHOCK.
• ELECTRICAL
RATING
OF THIS OVEN
: 120V
AC.
60Hz.
- You need a 120V, 60Hz, AC only, 15A or 20A, fused
electrical
supply
(located in the cabinet
above the
microwave
as close as possible
to the microwave
circuit) serving
only the microwave.