LG LMHM2017ST Installation Instructions - Page 5
Parts, Tools, Materials - venting
View all LG LMHM2017ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
PARTS, TOOLS, MATERIALS THE FOLLOWING PARTS ARE SUPPLIED WITH THE OVEN: NOTE: Depending on your ventilation requirements, you may not use all of these parts. Damper/duct connector (for roof venting or wall venting installation) Not Actual Size (2 pieces must be assembled as shown) One power cord clamp and One dark-colored mounting screw_.F- _ (to hold the power cord) Actual Size Two power cord clamp bushings - Actual Size (for the cord hole in a metal upper cabinet) Two 1/4" x 2" lag screws - Actual Size (for wall stud holes) Three 1/4" x 3" bolts - Actual Size (for securing to the upper cabinet) Four 1/4" x 3" toggle bolts - Actual Size (for drywall holes) Two tapping screws - Actual Size (for attaching the damper duct connector) One upper cabinet template- Not Actual Size Four spring toggle heads - Actual Size (for the toggle bolts) One rear wail template- Not Actual Size (3 pieces mounting plate only) REAR WALL TEMPLATE NOTE: You need to install at least two lag screws into a 2" x 4" stud and four anchor bolts into the wall. and the mounting area must meet the 150 Ibs. weight requirement.T -5-