LG LRG30355SB Owner's Manual (English) - Page 34

How To Delay The Start Of Cleaning, After A Clean Cycle

Page 34 highlights

OPERATING INSTRUCTIONS USING THE SELF-CLEANING OVEN The oven door must be closed and all controls set correctly for the cycle to work properly. HOW TO DELAY THE START OF CLEANING Make sure the clock shows the correct time of day. 1 Touch the SELF CLEAN pad. 2 Using the number pads, enter the desired clean time. 3 Touch the DELAY START pad. The earliest start time you can set will appear in the display. 4 Using the number pads, enter the time of day you want the clean cycle to start. 5 Touch the START pad. The oven shuts off automatically when the clean cycle is complete. 6 When the LOCKED DOOR light is off, the door will unlock automatically. • The words LOCK DOOR will flash and the oven control will signal if you set the clean cycle and forget to close the oven door. • To stop a clean cycle, touch the CLEAR/OFF pad. When the LOCKED DOOR light goes off indicating the oven has cooled below the locking temperature, open the door. The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off. AFTER A CLEAN CYCLE You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools. If white spots remain, remove them with a soap-filled scouring pad and rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle. If the oven is not clean after one clean cycle, repeat the cycle. • You cannot set the oven for cooking until the oven is cool enough for the door to unlock. • While the oven is self-cleaning, you can touch the CLOCK pad to display the time of day. To return to the clean countdown, touch the COOK TIME pad. • If the shelves become hard to slide, apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

34
USING THE SELF-CLEANING OVEN
Make sure the clock shows the correct time
of day.
Touch the
SELF CLEAN
pad.
Using the
number
pads, enter the
desired clean time.
Touch the
DELAY START
pad.
The earliest start time you can set
will appear in the display.
Using the
number
pads, enter the
time of day you want the clean
cycle to start.
Touch the
START
pad.
The door locks automatically. The display will
show the start time. It will not be possible to
open the oven door until the temperature drops
below the lock temperature and the
LOCKED
DOOR
light goes off.
The oven shuts off automatically when the clean
cycle is complete.
When the
LOCKED DOOR
light is off, the
door will unlock automatically.
The words
LOCK DOOR
will flash and the
oven control will signal if you set the clean
cycle and forget to close the oven door.
To stop a clean cycle, touch the
CLEAR/OFF
pad. When the
LOCKED DOOR
light goes off
indicating the oven has cooled below the
locking temperature, open the door.
HOW TO DELAY THE START OF CLEANING
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the
oven cools.
If white spots remain, remove them with a
soap-filled scouring pad and rinse thoroughly
with a vinegar and water mixture.
These deposits are usually a salt residue
that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
You cannot set the oven for cooking until the
oven is cool enough for the door to unlock.
While the oven is self-cleaning, you can touch
the
CLOCK
pad to display the time of day.
To return to the clean countdown, touch the
COOK TIME
pad.
If the shelves become hard to slide, apply a
small amount of vegetable oil or cooking oil to
a paper towel and wipe the edges of the oven
shelves with the paper towel.
AFTER A CLEAN CYCLE
OPERATING INSTRUCTIONS
2
1
3
4
5
6
The oven door must be closed and all controls set correctly for the cycle to work properly.