LG LRG30355SB Owner's Manual (English) - Page 40
Broiler Pan And Grid, Oven Shelves And Drawer Racks, Oven Light Replacement
UPC - 048231315876
View all LG LRG30355SB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
CARE AND CLEANING OF THE RANGE BROILER PAN AND GRID After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out grease from the pan into a proper container. Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad. If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned-on foods. The broiler pan and grid may be cleaned with a commercial oven cleaner. Both the broiler pan and grid can also be cleaned in a dishwasher. Do not store a soiled broiler pan and grid anywhere in the range. NOTICE: Do not clean the broiler pan or grid in a self-cleaning oven. OVEN SHELVES AND DRAWER RACKS If your oven is equipped with nickel oven shelves, they should be removed from the oven before beginning the self-clean cycle. To clean the nickel shelves, use an abrasive cleanser. After cleaning, rinse the shelves with clean water and dry with a clean cloth. If the shelves ever become hard to slide, wipe the shelf edges or oven shelf supports with vegetable oil. OVEN LIGHT REPLACEMENT CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel. Be sure to let the light cover and bulb cool completely. The oven light bulb is covered with a removable glass cover that is held in place with a bail-shaped wire. Remove the oven door, if desired, to reach cover easily. Wire Cover Holder To remove: 1 Disconnect electrical power from the range. 2 Hold a hand under the cover so it doesn't fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover. Do not remove any screws to remove the cover. 3 Do not touch hot bulb with a wet cloth. Replace bulb with a 40-watt household appliance bulb. To replace cover: 1 Place it into the groove of the light receptacle. Pull the wire forward to the center of the cover until it snaps into place. When in place, the wire holds the cover firmly. Be certain the wire is in the depression in the center of the cover. 2 Connect electrical power to the range. 40