LG LRG30355SB Owner's Manual (English) - Page 38
Stainless Steel Surfaces, Oven Air Vents, Control Panel, Front Manifold Panel And Knobs
UPC - 048231315876
View all LG LRG30355SB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
CARE AND CLEANING OF THE RANGE STAINLESS STEEL SURFACES Do not use a steel wool pad; it will scratch the surface. To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface. To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our toll-free customer service number: 1-800-243-0000 or visit our website at: us.lgservice.com OVEN AIR VENTS Never block the vents (air openings) of the range. They provide the air inlet and outlet that are necessary for the range to operate properly with correct combustion. Air openings are located at the rear of the cooktop, at the top and bottom of the oven door, and at the bottom of the range, under the warming drawer. CONTROL PANEL Lock out the touch pads before cleaning. See the Control Lockout information in the Special Features of Your Oven Control section in this manual. Clean up splatters with a damp cloth. You may also use a glass cleaner. Remove heavier soil with warm soapy water. Do not use abrasives of any kind. Unlock the touch pads after cleaning. FRONT MANIFOLD PANEL AND KNOBS It's a good idea to wipe the control panel after each use of the oven. Use a damp cloth to clean or rinse. For cleaning, use mild soap and water or a 50/50 solution of vinegar and water. For rinsing, use clean water. Polish dry with a soft cloth. Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleaners on the control panel-they will damage the finish. Do not try to bend knobs by pulling them up or down or by hanging a towel or other such loads. This can damage the gas valve shaft. The control knobs may be removed for easier cleaning. Make sure the knobs are in the OFF positions and pull them straight off the stems for cleaning. Surface burner knob To reinstall the knobs, make sure the knob has the OFF position centered at the top and slide the knob directly onto the stem. 38