LG SWWE50N3 Owners Manual - Page 52
When the Water Inlet Hoses Are Frozen, When the Drain Hose is Frozen
View all LG SWWE50N3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
en-us_main.book.book Page 51 Monday, February 20, 2023 2:02 PM ENGLISH 5 Add 1 gallon of nontoxic recreational vehicle (RV) antifreeze to the empty drum and close the door. • Never use automotive antifreeze. 6 Turn on the washer and press the Spin button. MAINTENANCE 51 4 Immerse the water inlet hoses in hot water to thaw them. 5 Reconnect the water inlet hoses to the water inlets of the washer and to the faucets. • See Connecting the Water Inlet Hoses for details. 7 Press the Start/Pause button to start the drain pump for 1 minute. • This will expel some of the antifreeze, leaving enough to protect the washer from damage. 6 Turn on the faucets. 7 Press the Power button to turn on the washer. 8 Turn off the washer and unplug the power cord. 8 Press the Spin button to operate spin only cycle for draining and spinning. 9 Dry the drum interior with a soft cloth, and close the door. 10 Store the washer in an upright position. 11 Remove the inserts from the dispenser. Drain any water in the compartments and let them dry. 12 To remove the antifreeze from the washer after storage, run the Speed Wash cycle using detergent. • Do not add laundry to this cycle. When the Water Inlet Hoses Are Frozen 1 Turn off the washer, and unplug the power cord. 9 Press the Start/Pause button. When the Drain Hose is Frozen 1 Pour hot water in the washer drum and close the door. 2 Wait for 1 - 2 hours. 3 Press the Power button. 4 Press the Spin button to operate spin only cycle for draining and spinning. 5 Press the Start/Pause button to make sure the water drains. 2 Turn off the faucets connected to the water inlet hoses. 3 Pour hot water on the frozen faucets to thaw the water inlet hoses and remove the water inlet hoses.