LG WM3555HWA Owners Manual - Page 28

us_main.book.book Page 28 Tuesday, October 12, 2021 1:56 PM 28 OPERATION Cycle Modifiers About Modifier Buttons Each cycle has default settings that are selected automatically. You can also customize these settings using the cycle modifier buttons. • Repeatedly press the button for the desired modifier until the indicator light for the desired setting is lit. • The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. • This is a high-efficiency washer, and the water levels may be much lower than you expect. This is normal, and cleaning/rinsing performance will not be compromised. NOTE • The setting lights up when it is selected. • To protect your garments, not every wash temperature, spin speed, soil level, or option is available with every cycle. • A chime will sound twice and the LED will not light if the desired setting is not allowed for the selected cycle. • Follow the fabric care labels on the garment for best results. Temp. Make sure the wash temperature is suitable for the type of load you are washing. • Press the Temp. button repeatedly to select the wash and rinse temperature combination for the selected cycle. • All rinses use unheated cold water. • Cold rinses use less energy. The actual cold rinse temperature depends on the temperature of the cold water at the faucet. • Your washer features a heating element to boost the hot water temperature for Ex Hot settings. This provides improved wash performance at normal water heater settings. Spin Higher spin speeds extract more water from clothes, reducing drying time and saving energy. • Press the Spin button repeatedly until the desired speed is selected. • Some fabrics, such as delicates, require a slower spin speed. Dry Cycles General Tips for Drying Use the automatic cycles to dry most loads. Electronic sensors measure the temperature of the exhaust to increase or decrease drying temperatures for faster reaction time and tighter temperature control. • Use the Wash+Dry cycle to automatically wash and dry laundry. • For better drying results, make sure all items are similar in material and thickness. • Do not overload the appliance by stuffing too many articles into the drum. Items must be able to tumble freely. • If you open the door and remove the load before the appliance has finished its cycle, remember to press the Start/Pause button. • After the end of dry, ENd is displayed. Woolen Articles Do not tumble dry woolen articles. Pull them to their original shape and dry them flat. Woven and Loopknit Materials Some woven and loopknit materials may shrink, by varying amounts, depending on their quality. Always stretch these materials out immediately after drying. Permanent Press and Synthetics Do not overload your appliance. Take out permanent press articles as soon as the appliance stops to reduce wrinkles. Baby Clothes and Nightgowns Always check the manufacturer's instructions. Blankets and Duvets Check fabric care labels on blankets and duvets before using the drying cycle. Heated drying may cause some blankets and duvets to shrink.