LG ZHX-313 Operation Guide - Page 41
Troubleshooting
View all LG ZHX-313 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
REFERENCE Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power. The power is on, but the DVD+Hi-Fi VCR does not work. No picture. Cause The power cord is disconnected. No disc is inserted. No tape is inserted. The TV is not set to receive DVD+Hi-Fi VCR signal output. TV/VCR mode for DVD+Hi-Fi VCR is set to TV. No sound. The video cable is not connected securely. The connected TV power is turned off. The Digital Audio Output is set to the wrong position. The playback picture is poor. The DVD+Hi-Fi VCR does not start playback. The disc is dirty. Tape heads are dirty. Tape is a rental or was recorded on another VCR. No disc is inserted. No tape is inserted. An unplayable disc is inserted. The disc is placed upside down. The disc is not placed within the guide. The remote control does not work properly. The disc is dirty. The remote control is not pointed at the remote sensor of the DVD+Hi-Fi VCR. The remote control is too far from the DVD+Hi-Fi VCR. There is an obstacle in the path of the remote control and the DVD+Hi-Fi VCR. The batteries in the remote control are exhausted. This remote control uses the same buttons for VCR and DVD functions (ex. PLAY). Correction Plug the power cord into the wall outlet securely. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) Select the appropriate video input mode on the TV so the picture from the DVD+Hi-Fi VCR appears on the TV screen. Press the TV/VCR button on the remote control repeatedly to choose VCR mode. TV indicator disappears from the display window. Connect the video cable securely. Turn on the TV. Set the Digital Audio Output to the correct position, then turn on the DVD+Hi-Fi VCR again by pressing POWER. Clean the disc. Clean video heads. Use CH/TRK (v/V) for manual tracking adjustment while tape is playing. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) Insert a playable disc. (Check the disc type, color system, and Regional code.) Place the disc with the playback side down. Place the disc on the disc tray correctly inside the guide. Clean the disc. Point the remote control at the remote sensor of the DVD+Hi-Fi VCR. Operate the remote control within 23 ft (7 m). Remove the obstacle. Replace the batteries with new ones. When using a VCR tape, first press the VCR button. When using a DVD, first press the DVD button. 41