Lenovo G710 User Guide - Lenovo G700, G710 (Windows 8.1 Preloaded) - Page 39
Fn + F2, System Memory, during startup. The BIOS setup utility screen opens.
View all Lenovo G710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Appendix A. CRU instructions Note: If only one DDR3 SDRAM is used on the computer you are servicing, the card must be installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( : upper slot). b a To make sure that the DDR3 SDRAM is installed correctly, do as follows: 1 Turn the computer on. 2 Hold Fn + F2 during startup. The BIOS setup utility screen opens. The System Memory item shows the total amount of memory installed in your computer. 35
Appendix A. CRU instructions
35
To make sure that the DDR3 SDRAM is installed correctly, do as follows:
1
Turn the computer on.
2
Hold
Fn + F2
during startup. The BIOS setup utility screen opens. The
System Memory
item shows the total amount of memory installed in
your computer.
Note:
If only one DDR3 SDRAM is used on the computer you are servicing, the card must be
installed in SLOT-0 (
: lower slot), but not in SLOT-1 (
: upper slot).
b
a