Lenovo IdeaCentre K330 Lenovo IdeaCentre K3 Series Hardware Maintenance Manual
Lenovo IdeaCentre K330 Manual
View all Lenovo IdeaCentre K330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lenovo IdeaCentre K330 manual content summary:
- Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 1
safety...4 Electrical safety...5 Safety inspection guide 7 Handling electrostatic discharge-sensitive devices 8 Grounding requirements 8 Safety notices...9 Chapter 3. General information 12 Specifications...12 Chapter 4. General Checkout 13 Problem determination tips 14 Chapter 5. Using - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 2
Manual Chapter 6. Symptom-to-FRU Index 22 Hard disk drive boot error 22 Power Supply Problems 23 Beep symptoms 24 POST error codes 25 Undetermined problems Completing the installation 51 Chapter 8. Additional Service Information(Type G43)..53 Power management 53 Appendix. Statement 54 ii - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 3
manual 1Chapter 1. About this manual This manual contains service and reference information for Lenovo IdeaCentre K computers listed on the cover. It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing exécuter les instructions. Lesen Sie - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 4
Manual Using eSupport For Key Commodities (Examples - hard disk drive, system board, microprocessor, LCD, and memory) •• eSupport can be used to view the list of key commodities built in a particular machine serial. •• eSupport can be accessed at the following Web site: http://www.lenovo.com/support - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 5
to be ready to support Lenovo's requirements and schedule. Products sold in 2005, will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant parts. RoHS compliant Lenovo IdeaCentre K parts have unique FRU - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 6
Hardware Maintenance Manual Safety information 2 This chapter contains the safety information that you need to be familiar with before servicing a computer. General safety Follow these rules to ensure general safety: •• Observe good housekeeping in the area of the machines during and after - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 7
in any other conditions that might be hazardous to your eyes. •• After service, reinstall all safety shields, guards, labels, and ground wires. Replace any modems before you open the server/workstation covers, unless instructed otherwise in the installation and configuration procedures. Observe the - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 8
Hardware Maintenance Manual •• If when you work with very high voltages; these instructions are in the safety sections of maintenance information. such touching can cause personal injury and machine damage. •• Do not service the following parts with the power on when they are removed from - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 9
, had required safety items installed to protect users and service personnel from injury. This guide addresses only those items. However, good judgment should be could be and whether you can continue without first correcting the problem. Consider these conditions and the safety hazards they present: - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 10
Hardware Maintenance Manual Handling electrostatic discharge-sensitive devices Any computer part containing a grounding system, such as those listed below, to provide protection that meets the specific service requirement. Note: The use of a grounding system is desirable but not required to protect - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 11
damage. •• Disconnect the attached power cords, telecommunications systems, networks, and modems before you open the device covers, unless instructed otherwise in the installation and configuration procedures. •• Connect and disconnect cables as described in the following table when installing - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 12
Hardware Maintenance Manual CAUTION: When replacing the lithium battery, use only Part Number covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. •• Use of controls or adjustments or performance of procedures other than - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 13
Chapter 2. Safety information CAUTION: Use safe practices when lifting. CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 14
Hardware Maintenance Manual General information 3 This chapter provides general information that applies to all machine types supported by this publication. Specifications This section lists the physical specifications for your computer. Type IdeaCentre K3 This section lists the physical - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 15
General Checkout Attention The drives in the computer you are servicing might have been rearranged or the drive startup sequence of the system board. Use the following procedure to help determine the cause of the problem: 1. Power-off the computer and all external devices. 2. Check all cables and - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 16
Hardware Maintenance Manual 5. Power-on the computer. • Look for displayed error codes • Listen for beep codes • Look for readable instructions or a main assist you in problem determination. If possible, have this information available when requesting assistance from Service Support and Engineering - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 17
Chapter 4. General Checkout Comparing the configuration and software set-up between "working and non-working" systems will often lead to problem resolution. 15 - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 18
Hardware Maintenance Manual Using the Setup Utility (Type G43) 5 The Setup Utility program is used to view and change the configuration settings of your computer, regardless of which - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 19
Chapter 5. Using the Setup Utility keyboard. The keys used to perform various tasks are displayed on the right side of each screen. Using passwords By using the Setup Utility program, you can set passwords to prevent unauthorized persons from gaining access to your computer and data. See "Starting - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 20
Hardware Maintenance Manual Setting, changing, and deleting a Administrator password To set, change, or delete a password, do the following: Note: A password can be any combination of up to 16 - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 21
Chapter 5. Using the Setup Utility 2. From the Setup Utility program menu, Select Security. 3. selet Change User Password and press Enter. 4. Select Set Power-On Password and press Enter. 5. when prompted to confirm the password, type the password again. If you type the password correctly, the - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 22
Hardware Maintenance Manual Selecting a startup device If your computer does not start up (boot) from a device such as the CD-ROM, diskette, or hard disk as expected, use - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 23
Chapter 5. Using the Setup Utility Exiting from the Setup Utility program When you finish viewing or changing settings, press Esc to return to the Setup Utility program menu (you might have to press Esc several times). If you want to save the new settings, select Save changes and Exit before you - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 24
page 13. This index can also be used to help you decide which FRUs to have available when servicing a computer. If you are unable to correct the problem using this index, go to "Undetermined problems" on page 27. Notes • If you have both an error message and an incorrect audio response diagnose the - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 25
drive. 2. Using the operating systems programs format the hard disk drive. Replace the hard disk drive. Power Supply Problems If you suspect a power problem, use the following procedures. Check/Verify FRU/Action Check the following for proper Reseat connectors installation. •• Power Cord - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 26
Maintenance Manual Beep consult your system 8042 Gate A20 test error (cannot manufacturer's technical support. switch to protected mode) • If beep codes are not system exception interrupt error) one at a time until the problem happens again. This will reveal the malfunctioning card. 8 - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 27
other expansion cards are absent, consult your system manufacturer's technical support. • If beep codes are not generated 11 beeps when Insert the cards back into the system one at a time until the problem happens again. This will reveal the malfunctioning card. POST error codes Each time - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 28
Hardware Maintenance Manual POST Error Message CMOS Date/Time Not Set CMOS Battery Low CMOS Checksum Bad not be found or initialized. Make sure the hard drive is correctly installed. PS2 Mouse support is enabled in the BIOS setup butthe device is not detected. You can plug PS2 Mouse or set PS2 Mouse - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 29
was unable to find a suitable boot device. Make sure the boot drive is properly connected to the computer. Make sure you have bootable media. Undetermined problems If this computer has a parallel ATA hard disk drive, make sure that the hard disk drive is jumpered as a master and the optical drive - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 30
or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://consumersupport.lenovo.com Note Use only parts provided by Lenovo. General information Pre-disassembly instructions Before proceeding with the - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 31
Removing the computer cover Attention Chapter 7. Replacing hardware Turn off the computer and wait 3 to 5 minutes to let the computer cool before removing the computer cover. To remove the computer cover: 1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut down your - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 32
Hardware Maintenance Manual Removing the front bezel To remove the front bezel: 1. Remove the computer cover. Refer to "Removing the computer cover". Note For this procedure, it helps - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 33
reading the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://consumersupport.lenovo.com 31 - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 34
Hardware Maintenance Manual To replace a memory module: 1. Remove the computer cover. Refer to "Removing the computer cover". Note For this procedure, it helps to lay the computer on - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 35
the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://consumersupport.lenovo.com To replace - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 36
the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://consumersupport.lenovo.com To replace - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 37
reading the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://consumersupport.lenovo.com 35 - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 38
Hardware Maintenance Manual To replace the system fan assembly: 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Locate the system fan assembly. Refer to "Identifying parts - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 39
Chapter 7. Replacing hardware 5. Install the new system fan assembly by aligning the rubber mounts of the system fan assembly with the holes on the chassis and push the rubber mounts through the holes. 6. Pull on the tips of the rubber mounts until the fan assembly is in place. 7. Connect the system - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 40
the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://consumersupport.lenovo.com To replace - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 41
the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://consumersupport.lenovo.com To replace - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 42
Hardware Maintenance Manual 2. At the rear of the computer, press the release button to open the adapter latch and remove the adapter by pulling it straight out of the adapter connector. 40 - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 43
Chapter 7. Replacing hardware 3. Install the new adapter into the same adapter connector. 4. Ensure the adapter is fully seated into the adapter connector. 5. At the rear of the computer, pivot the adapter latch to the closed position to secure the adapter. 6. Refer to the "Completing the - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 44
Hardware Maintenance Manual Note 1 eplacement of some models equipped with graphic adapter bracket is different. Please remove the plastic bracket first as the following: 1. Remove the two screws - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 45
Chapter 7. Replacing hardware 2. Install the two screws to secure the plastic bracket. Note Use only the screws provided by Lenovo. Note 2 Replacement of some models equipped with graphic adapter bracket is different. Please remove the bracket first as the following: 1. Remove the screw that secures - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 46
Hardware Maintenance Manual 2. Press the pin on one end of the metal bracket and pull the metal bracket straight out of the chassis. After the Graphic Adapter is - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 47
reading the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://consumersupport.lenovo.com 45 - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 48
Hardware Maintenance Manual To replace an CPU 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Remove the front bezel. Refer to "Removing the front bezel". 3. Remove - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 49
Note Chapter 7. Replacing hardware a. Note the orientation of the notches on the microprocessor. This is important when reinstalling the microprocessor on the new system board. b. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 50
Hardware Maintenance Manual Important To avoid damaging the microprocessor contacts, do not tilt the microprocessor when installing it into the socket. 10. Lower the microprocessor straight down into - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 51
Chapter 7. Replacing hardware Replacing the keyboard To replace the keyboard: 1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut down your operating system, and turn off all attached devices and the computer. 2. Unplug all power cords from electrical outlets. 3. Locate the - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 52
Hardware Maintenance Manual Note Your mouse might be connected to the standard mouse connector at the rear of the computer or to a USB connector at either the front - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 53
need to confirm the updated information in the Setup Utility program. Refer to "Starting the Setup Utility" in the User Guide or in the Hardware Maintenance Manual. To complete the part installation: 1. Ensure that all components have been reassembled correctly and that no tools or loose screws - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 54
connectors on the rear of the computer". 5. To update your configuration settings, refer to "Starting the Setup Utility" in the User Guide or in the Hardware Maintenance Manual. Note In most areas of the world, Lenovo requires the return of the defective CRU. Information about this will come with - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 55
G43) 8Chapter 8. Additional Service Information This chapter provides additional information that the service representative might find helpful Power Management (APM) BIOS mode is ignored. Not all operating systems support ACPI BIOS mode. Automatic Power-On features The Automatic Power-On features - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 56
from failure to operate the product according to instructions and requirements described in the manuals included with your computer. Lenovo will not operations carried out by Lenovo professional service staff. Lenovo has made every attempt to ensure that the manuals included with your computer, are - Lenovo IdeaCentre K330 | Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 57
are welcome to contact us for any inconsistency between the product and the manuals included with your computer. For the latest information or any questions or comments, please visit consumer support website at: http://consumersupport.lenovo.com Lenovo is a registered trademark of Lenovo. Microsoft
Contents
i
Contents
Chapter 1. About this manual
................................................
1
Important
Safety Information
......................................................................
1
Using eSupport
....................................................................................................
2
Important information about replacing RoHS compliant FRUs ..2
Chapter 2. Safety information
................................................
4
General safety
.......................................................................................................
4
Electrical safety
....................................................................................................
5
Safety inspection guide
...................................................................................
7
Handling electrostatic discharge-sensitive devices
.........................
8
Grounding requirements
...............................................................................
8
Safety notices
........................................................................................................
9
Chapter 3. General information
...........................................
12
Speciļ¬cations
.....................................................................................................
12
Chapter 4. General Checkout
...............................................
13
Problem determination tips
......................................................................
14
Chapter 5. Using the Setup Utility (Type G43)
.................
16
Starting the Setup Utility program
.........................................................
16
Viewing and changing settings
................................................................
16
Using passwords
..............................................................................................
17
Using Device
......................................................................................................
19
Selecting a startup device
...........................................................................
20
Exiting from the Setup Utility program
................................................
21