Lenovo J115 Hardware Maintenance Manual - Page 116
To avoid damaging the microprocessor contacts, do not tilt the microprocessor when installing it into
View all Lenovo J115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
b. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 8. Make sure that the microprocessor retainer is fully open. 9. Holding the microprocessor with your fingers, remove the protective cover 2 that protects the gold contacts on the new microprocessor 1 . 10. Holding the microprocessor with your fingers, position the microprocessor so that the notches on the microprocessor are aligned with the tabs in the microprocessor socket. Important To avoid damaging the microprocessor contacts, do not tilt the microprocessor when installing it into the socket. 11. Lower the microprocessor straight down into the system board socket of the system board. 12. Lower the microprocessor retainer. 110 Hardware Maintenance Manual Lenovo 3000 J Series