Lenovo J115 Hardware Maintenance Manual - Page 64
X-XXX 071-01X-XXX 071-02X-XXX, Audio port Interface Test Passed
View all Lenovo J115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Diagnostic Error Code 035-198-XXX RAID interface test aborted 035-199-XXX RAID interface test failed, cause unknown 071-000-XXX Audio port Interface Test Passed 071-00X-XXX 071-01X-XXX 071-02X-XXXAudio port error 071-03X-XXX Audio port failure 071-04X-XXX Audio port failure 071-195-XXX Audio port Test aborted by user 071-196-XXX Audio port test halt, error threshold exceeded 071-197-XXX Audio port test warning 071-198-XXX Audio port test aborted 071-199-XXX Audio port test failed, cause unknown FRU/Action 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Diagnostics, Test and Recovery Information" on page 41 2. Flash the system and re-test. See "Flash update procedures" on page 185 3. Go to "Undetermined problems" on page 67 1. See "Undetermined problems" on page 67 2. Flash the system and re-test. See "Flash update procedures" on page 185 3. Replace component under function test No action 1. Run Setup 2. Flash the system. See "Flash update procedures" on page 185 3. System board 1. Speakers 2. Microphone 3. Audio card, if installed 4. System board 1. Run Setup 2. Audio card, if installed 3. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Diagnostics, Test and Recovery Information" on page 41 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Diagnostics, Test and Recovery Information" on page 41 2. Flash the system and re-test. See "Flash update procedures" on page 185 3. Go to "Undetermined problems" on page 67 1. See "Undetermined problems" on page 67 2. Flash the system and re-test. See "Flash update procedures" on page 185 3. Replace component under function test 58 Hardware Maintenance Manual Lenovo 3000 J Series