Lenovo ThinkCentre A61 Hardware Maintenance Manual - Page 97
Vv Vv
View all Lenovo ThinkCentre A61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
3. Remove the four screws that secure the power supply at the rear of the chassis. 4. Lift the power supply out of the chassis. 5. If the power supply has a voltage-selection switch, ensure that it is set to match the voltage available at the electrical outlet. v If the voltage supply range in your local country or region is 100-127 V AC, set the switch to 115 V. v If the voltage supply range in your local country or region is 200-240 V AC, set the switch to 230 V. 6. Install the new power supply into the chassis so that the screw holes in the power supply align with those in the chassis. 7. Install the four screws to secure the power supply. Note: Use only the screws provided by Lenovo. 8. Reconnect the power supply connectors to the system board. See "Locating parts on the system board" on page 89. 9. Reconnect a power supply connector to each of the drives. 10. Go to "Completing the FRU replacement" on page 114. Chapter 8. Replacing FRUs - Tower Computers 91