Lenovo ThinkServer RD120 User Guide - Page 64

Installing, optional, drive, 5-inch, model, server

Get Lenovo ThinkServer RD120 PDF manuals and user guides View all Lenovo ThinkServer RD120 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

2.5-inch drives To remove a hot-swap hard disk drive, complete the following steps: 1. Read the safety information that begins on page v and "Installation guidelines" on page 29. 2. Move the tray handle on the drive to the open position (perpendicular to the drive). 3. Pull the hot-swap drive assembly from the bay. Note: You might have to reconfigure the disk arrays after you remove a hard disk drive. If you have other optional devices to install or remove, do so now. Otherwise, go to "Completing the installation" on page 74. Installing an optional tape drive Prepare the drive according to the instructions that come with the drive, setting any switches or jumpers; then, see "Installing a SATA tape drive in a 3.5-inch model server" or "Installing a SATA tape drive in a 2.5-inch model server" on page 53. Installing a SATA tape drive in a 3.5-inch model server Install the optional SATA tape drive in the two bottom-left hard disk drive bays. If hard disk drives are installed in those bays, move the drives to other bays. The cables for the tape drive come with the tape drive. 50 ThinkServer RD120 Types 6444, 6445, 6446, and 6447: User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
2.5-inch
drives
To
remove
a
hot-swap
hard
disk
drive,
complete
the
following
steps:
1.
Read
the
safety
information
that
begins
on
page
v
and
“Installation
guidelines”
on
page
29.
2.
Move
the
tray
handle
on
the
drive
to
the
open
position
(perpendicular
to
the
drive).
3.
Pull
the
hot-swap
drive
assembly
from
the
bay.
Note:
You
might
have
to
reconfigure
the
disk
arrays
after
you
remove
a
hard
disk
drive.
If
you
have
other
optional
devices
to
install
or
remove,
do
so
now.
Otherwise,
go
to
“Completing
the
installation”
on
page
74.
Installing
an
optional
tape
drive
Prepare
the
drive
according
to
the
instructions
that
come
with
the
drive,
setting
any
switches
or
jumpers;
then,
see
“Installing
a
SATA
tape
drive
in
a
3.5-inch
model
server”
or
“Installing
a
SATA
tape
drive
in
a
2.5-inch
model
server”
on
page
53.
Installing
a
SATA
tape
drive
in
a
3.5-inch
model
server
Install
the
optional
SATA
tape
drive
in
the
two
bottom-left
hard
disk
drive
bays.
If
hard
disk
drives
are
installed
in
those
bays,
move
the
drives
to
other
bays.
The
cables
for
the
tape
drive
come
with
the
tape
drive.
50
ThinkServer
RD120
Types
6444,
6445,
6446,
and
6447:
User
Guide