Lenovo ThinkServer RD120 User Guide - Page 87
Replacing, CD-RW/DVD, drive
View all Lenovo ThinkServer RD120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Replacing the CD-RW/DVD drive To remove the CD-RW/DVD drive, complete the following steps. 1. Read the safety information that begins on page v and "Installation guidelines" on page 29. 2. Turn off the server and peripheral devices, and disconnect the power cords and all external cables. Attention: In a dc power environment, only trained service personnel other than Lenovo service technicians are authorized to connect or disconnect power to the dc power supply. See the documentation that comes with each dc power supply. 3. Remove the cover (see "Removing the cover" on page 31). 4. Press the release tab 1 down to release the drive 2 ; then, while pressing the tab, push the drive toward the front of the server. 5. From the front of the server, pull the drive out of the bay. 6. Remove the retention clip 1 and alignment pins 2 from the drive. To install a CD-RW/DVD drive, complete the following steps: 1. Read the safety information that begins on page v and "Installation guidelines" on page 29. 2. Make sure that the server and peripheral devices are turned off, and that the power cords and all external cables are disconnected. Chapter 2. Installing optional devices 73