Lenovo ThinkVision LT1423p 13.3-inch IPS LED Backlit LCD Wireless Touch Monitor - Page 28
USB Monitor Display Information settings, Standby and Hibernate, Shut down and Restart
View all Lenovo ThinkVision LT1423p 13.3-inch IPS LED Backlit LCD Wireless Touch Monitor with pen manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Additional Information The following section provides additional information on the use of the USB Monitor USB Graphics software. Monitor Calibration DDC/CI is not supported on displays with integrated USB Monitor technology. Media Playback On Windows 7 and Windows 8 (in extend modes), the USB Monitor USB Graphics device can display media files and DVDs using the following media players: Windows Media Player 11 (http://www.microsoft.com/windows/windowsmedia/default.mspx) WinDVD 8 (www.intervideo.com) PowerDVD 7 (www.cyberlink.com) RealPlayer 11 (www.real.com) The USB Monitor USB Graphics device can display media files and DVDs using most media players. Media playback in mirror mode (Windows 8) or in Basic mode (Windows 7) is not recommended. Using Multiple USB Monitor USB Graphics devices The software supports up to six simultaneously USB attached screens. It is also possible that different sets of screens are being used at different times, for example two in the office and two at home. The software saves each screen's display profile separately. This allows for different physical positioning, or different resolutions, of connected monitors in the office and the home. Standby and Hibernate, Shut down and Restart If the PC that the USB Monitor USB Graphics device is connected to is placed into standby or hibernate mode, the display goes blank. When the PC is again powered up (and unlocked if necessary) the connected monitor returns to the same mode as it was before stand by or hibernation. If the PC is shut down, restarted and logged in, again the connected display returns to the same mode as it was before shutdown. USB Monitor USB Graphics with Multiple Users USB Monitor USB Graphics work with multiple users on the PC. The mode settings are saved for each user so each can use their own desktop configuration. Disconnecting the USB Monitor USB Graphics If the USB Monitor USB Graphics device is powered off or the USB cable is removed from the computer, the display blanks. All windows and icons move to the primary screen. On reconnection or powering up of the USB Monitor USB Graphics device, the display returns to the same mode as it was before disconnection. However, windows and icons that were previously on the screen will not be moved back. Chapter 4. Working with LT1423pwC Wide USB Monitor 4-7