Lenovo V4400u User Guide - Lenovo V4400u - Page 45

Memory cards, such as SD cards, Memory Stick cards, MultiMediaCards, and Memory Stick Pro cards

Page 45 highlights

• Wait until you hear the CD or DVD click into the center pivot of the drive before closing the tray. • When installing the hard disk drives or the solid-state drive, follow the instructions shipped with your hardware, and apply pressure only where needed on the device. • Turn off your computer if you are replacing the hard disk drive or solid-state drive. • Store your external and removable hard disk drives or optical drives in the appropriate containers or packaging when not in use. • Before you install any of the following devices, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. The static electricity could damage the device. - Memory cards, such as SD cards, Memory Stick cards, MultiMediaCards, and Memory Stick Pro cards - Memory modules Note: Not all devices listed are included in your computer. • When transferring data to or from a flash media card, such as an SD card, do not put your computer in sleep or hibernation mode before the data transfer is complete. Otherwise, data might be damaged. Clean the computer cover Occasionally clean your computer cover by doing the following: 1. Prepare a mixture of a gentle kitchen-use detergent (one that does not contain abrasive powder or strong chemicals such as acid or alkaline). Use 5 parts water to 1 part detergent. 2. Absorb the diluted detergent into a sponge. 3. Squeeze excess liquid from the sponge. 4. Wipe the cover with the sponge, using a circular motion and taking care not to let any excess liquid drip. 5. Wipe the cover to remove the detergent. 6. Rinse the sponge with clean running water. 7. Wipe the cover with the clean sponge. 8. Wipe the cover again with a dry, soft, lint-free cloth. 9. Wait for the cover to dry completely and remove any fibers from the cloth. Note: Before cleaning the computer cover, ensure that you have turned off the computer and disconnected the power cord. Clean the computer keyboard To clean the computer keyboard, do the following: 1. Apply some isopropyl rubbing alcohol to a soft, dust-free cloth. 2. Wipe each keytop surface with the cloth. Wipe the keys one by one; if you wipe several keys at a time, the cloth might hook onto an adjacent key and possibly damage it. Ensure that no liquid drips onto or between the keys. 3. Allow the keyboard to dry. 4. To remove any crumbs and dust from beneath the keys, use a camera blower with a brush or cool air from a hair drier. Note: Avoid spraying cleaner directly onto the display or the keyboard. Clean the computer display To clean the computer display, do the following: 1. Gently wipe the display with a dry, soft, lint-free cloth. If you see a scratchlike mark on the display, it might be a stain transferred from the keyboard when the cover was pressed from the outside. Chapter 6. Preventing problems 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

Wait until you hear the CD or DVD click into the center pivot of the drive before closing the tray.
When installing the hard disk drives or the solid-state drive, follow the instructions shipped with your
hardware, and apply pressure only where needed on the device.
Turn off your computer if you are replacing the hard disk drive or solid-state drive.
Store your external and removable hard disk drives or optical drives in the appropriate containers or
packaging when not in use.
Before you install any of the following devices, touch a metal table or a grounded metal object. This action
reduces any static electricity from your body. The static electricity could damage the device.
Memory cards, such as SD cards, Memory Stick cards, MultiMediaCards, and Memory Stick Pro cards
Memory modules
Note:
Not all devices listed are included in your computer.
When transferring data to or from a flash media card, such as an SD card, do not put your computer in
sleep or hibernation mode before the data transfer is complete. Otherwise, data might be damaged.
Clean the computer cover
Occasionally clean your computer cover by doing the following:
1. Prepare a mixture of a gentle kitchen-use detergent (one that does not contain abrasive powder or
strong chemicals such as acid or alkaline). Use 5 parts water to 1 part detergent.
2. Absorb the diluted detergent into a sponge.
3. Squeeze excess liquid from the sponge.
4. Wipe the cover with the sponge, using a circular motion and taking care not to let any excess liquid drip.
5. Wipe the cover to remove the detergent.
6. Rinse the sponge with clean running water.
7. Wipe the cover with the clean sponge.
8. Wipe the cover again with a dry, soft, lint-free cloth.
9. Wait for the cover to dry completely and remove any fibers from the cloth.
Note:
Before cleaning the computer cover, ensure that you have turned off the computer and disconnected
the power cord.
Clean the computer keyboard
To clean the computer keyboard, do the following:
1. Apply some isopropyl rubbing alcohol to a soft, dust-free cloth.
2. Wipe each keytop surface with the cloth. Wipe the keys one by one; if you wipe several keys at a time,
the cloth might hook onto an adjacent key and possibly damage it. Ensure that no liquid drips onto
or between the keys.
3. Allow the keyboard to dry.
4. To remove any crumbs and dust from beneath the keys, use a camera blower with a brush or cool air
from a hair drier.
Note:
Avoid spraying cleaner directly onto the display or the keyboard.
Clean the computer display
To clean the computer display, do the following:
1. Gently wipe the display with a dry, soft, lint-free cloth. If you see a scratchlike mark on the display, it
might be a stain transferred from the keyboard when the cover was pressed from the outside.
Chapter 6
.
Preventing problems
31