Lexmark 13B0501 User Manual - Page 120
PS SmartSwitch, NPA Mode, USB Buffer, Mac Binary PS, USB with ENA
View all Lexmark 13B0501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Menu item PS SmartSwitch On Off NPA Mode Off Auto USB Buffer Disabled Auto Mac Binary PS On Off Auto USB with ENA ENA Address ENA Netmask ENA Gateway Description Sets the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language Notes: • On is the factory default setting. • When the Off setting is used, the printer does not examine incoming data. • When the Off setting is used, the printer uses PCL emulation if the PCL Smartswitch setting is On. It uses the default printer language specified in the Setup menu if the PCL SmartSwitch setting is Off. Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol Notes: • Auto is the factory default setting. • Changing this setting causes the printer to restart. Sets the size of the USB input buffer Notes: • Auto is the factory default setting. • The Disabled setting turns off job buffering. Any jobs already buffered are printed before normal processing is resumed. • The USB buffer size value can be changed in 1-K increments. • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether the Resource Save setting is On or Off. • Changing this setting causes the printer to restart. Sets the printer to process Macintosh binary PostScript print jobs Notes: • Auto is the factory default setting. • The Off setting filters print jobs using the standard protocol. • The On setting processes raw binary PostScript print jobs. Sets the network address, netmask, and gateway information for an external print server that is attached to the printer using a USB cable Note: This menu item and its submenus are available only if the printer is attached to an external print server through the USB port. Understanding printer menus 120