Lexmark 13B0501 User Manual - Page 177
Power Saver, Programming Engine Code DO NOT POWER OFF, Queued for sending, Remove packaging material
View all Lexmark 13B0501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Power Saver The printer is saving power while it waits for the next print job. Send a job to print to take the printer out of Power Saver mode. Programming Engine Code DO NOT POWER OFF Wait for the message to clear. Warning-Potential Damage: Do not turn the printer power off while Programming Engine Code appears on the display. Programming flash DO NOT POWER OFF Wait for the message to clear. Warning-Potential Damage: Do not turn the printer power off while Programming flash appears on the display. Programming System Code DO NOT POWER OFF Wait for the message to clear. Warning-Potential Damage: Do not turn the printer power off while Programming System Code appears on the display. Queued for sending The scanning process of a fax job completed, but the job is not sent yet because another fax job is being sent or received. Wait for the message to clear. Remove packaging material, check Remove any remaining packaging material from the specified location. Remove paper from standard output bin Remove the stack of paper from the standard exit bin. Scanner ADF Cover Open The ADF cover is open. The message clears when the cover is closed. Scanner Jam Access Cover Open Close the bottom ADF door to clear the message. Toner is low Try one or more of the following: • Replace the toner cartridge. • Press to clear the message and continue printing. Troubleshooting 177