Lexmark 19Z0201 User's Guide - Page 57

Setup Menu (continued) Menu item Job Buffer Size Values Disabled* 10...100% Job Accounting If you have an optional disk installed in your printer, you can allocate a portion of the available disk space for spooling jobs. You can choose any 1% increment between 10 and 100%. You must select a Job Buffer Size before you can set the Job Buffer menu to On for a particular port. Warning: If you change the job buffer size, the printer formats the hard disk, and all resources stored on the disk are deleted. The Job Buffer Size menu item is only displayed if the installed disk option is formatted and is not defective or Read/Write or Write protected. Off* On Job Acct Limit If you have an optional disk installed in your printer, set Job Accounting On to use the disk to store statistical information about your printer's most recent jobs. The statistics include whether the job printed with or without errors, time required to print the job, size (in bytes) of the job, requested paper size and paper type, color settings used, total number of printed pages, and the number of copies requested. To print a listing of all accumulated statistics, select Print from the Job Acct Stat menu item in the Utilities Menu. The Job Accounting menu item is not displayed if the installed disk option is defective or Read/Write or Write protected, or if the Job Buffer Size menu item is set to 100%. Disabled 10...1000* *Factory default If you have an optional disk installed in your printer, you can use the disk to store statistical information about a specified number of jobs. The value you select from the Job Acct Limit menu item determines the number of jobs for which statistics are stored. Once you reach the job limit, statistics for the oldest job are deleted as new statistics are stored, maintaining statistics for the specified number of jobs. If you select Disabled, the only limit to the number of jobs for which statistics are stored is the memory available on the disk. Warning: When you change the Job Acct Limit value, all statistical information stored on the disk is discarded. The Job Acct Limit menu item is not displayed if the installed disk option is defective or Read/ Write or Write protected, or if the Job Buffer Size menu item is set to 100%. Chapter 3: Menus 43