Lexmark 20K1100 Setup Guide - Page 32
Reinstalling the system board, the system board is pushed
UPC - 734646641005
View all Lexmark 20K1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Reinstalling the system board Follow the instructions below to reinstall the system board. 1 Orient the system board as shown and align it with the tracks in the printer slot. 2 Push the system board firmly and evenly into the printer. Make sure the system board is pushed completely into the printer slot. 3 Reattach the four screws to the corners of the system board. Install memory, firmware, or option cards 27
27
Install memory, firmware, or option cards
Reinstalling the system board
Follow the instructions below to reinstall
the system board.
1
Orient the system board as shown
and align it with the tracks in the
printer slot.
2
Push the system board firmly and
evenly into the printer. Make sure
the system board is pushed
completely into the printer slot.
3
Reattach the four screws to the
corners of the system board.