Lexmark 20K1100 Setup Guide - Page 60

Mac OS X version 10.1.2 and later Step 1: Install a custom PPD file 1 Insert the drivers CD into your CD-ROM drive. 2 Click Mac OS X English. 3 Double-click the installer icon for your printer to run the installer. Note: If you don't know which printer to select, look on the Network Setup page under the AppleTalk heading to find the default name of the printer. Step 2: Create a print queue in Print Center 1 Click Applications Utilities Print Center. 2 Click Add Printer. 3 Choose AppleTalk as your method of connection. 4 If you have a routed network, select the zone from the list. If you don't know which zone to select, look on the Network Setup page under AppleTalk for Zone. 5 Select the new printer from the list, and then click Add. 6 Verify printer installation: a Click Applications TextEdit. b Choose File Print Summary. The Summary window shows the PPD installed for your printer. • If the PPD file displayed in the Summary window is correct for your printer, printer setup is complete. • If the PPD file displayed in the Summary window is not correct for your printer, delete the print queue from Print Center and repeat "Step 1: Install a custom PPD file" on page 55. UNIX/Linux Note: The Sun Solaris and Linux packages are available on the drivers CD and on our Lexmark Web site at www.lexmark.com. Your printer supports many UNIX and Linux platforms, such as Sun Solaris and Red Hat. Visit our Lexmark Web site at www.lexmark.com for a complete list of supported UNIX and Linux platforms. Lexmark provides a printer driver package for each supported UNIX and Linux platform. The User's Guide in each package gives detailed instructions for installing and using Lexmark printers in UNIX and Linux environments. Install drivers for network printing 55