Lexmark 20K1100 Setup Guide - Page 55

for your printing configuration and operating system to configure your network printer: Printing configuration Operating system Go to page... Direct • Printer is connected directly to the network using a network cable, such as Ethernet. • Printer drivers are typically installed on each network computer. Windows 95/98/Me, 50 Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003 Shared Windows NT 4.0, 51 • Printer is connected to one of the computers on the network using a local cable, such as USB. • Printer drivers are installed on the computer attached to the printer. Windows 2000, Windows XP, or Windows Server 2003 • During driver installation, the printer is set up to be "shared" so that other network computers can print to it. Direct printing using Windows 95/98,Me, Windows NT 4.0, Windows 2000, Windows XP, and Windows Server 2003 Printer Clients Note: If you don't know the IP address, print a network setup page and look under the TCP/IP heading. For help, see "Printing a network setup page" on page 45. To install a custom printer driver and network port: 1 Launch the drivers CD. 2 Click Install Printer and Software. 3 Click Printer. 4 Click Agree to accept the license agreement. 5 Select Quick install, and then click Next. 6 Click Create new port. 7 Click Add Port. 8 Select Lexmark TCP/IP Network Port, and then click Add. 9 Enter the information to create the port. a Assign a logical port name. This can be any name that you associate with the printer, such as Color1-lab4. After the port is created, this name appears in the list of available ports on the Method of Connection screen. b Enter the IP address in the text box. c Click Add Port. 10 Click Done until you return to the Method of Connection screen. Install drivers for network printing 50