Lexmark 22R0010 Menus and Messages - Page 6

Using printer menus User Settings Note: An asterisk (*) next to a value indicates the default setting. Config Menu Configuration options for the printer that control how the printer functions. Menu selection Timeout SleepMode SleepTime Port Priority Purpose Values Specifies the amount of time in seconds before a timeout occurs. The timeout causes the printer's reception of print data to be suspended. It then causes the printer to forcibly output the partially received data so it can receive new print data. The result may be a printout with partial loss of data, an incorrect printout, or no printout. 5 to 999 (300*) OFF Specifies whether or not to use the ON* printer's power saver feature. OFF Specifies the amount of time (in minutes) the printer waits after a job is printed before it goes into a reduced power state. 30M*, 60M, 120M, 240M, 5M, and 15M Specifies which interface port to be AUTO* used. NET USB Specifies priority between the LAN interface port and the USB interface port when both of them are enabled in the Port submenu. AUTO* NET USB The printer enters sleep mode when the time specified in "SleepTime" has passed. The power saver feature is disabled. Specifies both the LAN port and the USB port. Either port is automatically used according to the setting of the Priority submenu. Specifies the LAN port. This setting option prohibits the printer from receiving print data through the USB port. Specifies the USB port. This setting option prohibits the printer from receiving print data through the LAN port. The printer alternately uses the LAN port and the parallel port for receiving print data. The printer prioritizes the LAN port for receiving print data, sometimes causing no output of print data via the USB port. The printer prioritizes the USB port for receiving print data, sometimes causing no output of print data via the LAN port. 6