Lexmark 3000 Color Jetprinter Service Manual - Page 16
Power-On Self Test (POST) Sequence, POST Symptom Table, All motors stop and the power light stays on.
View all Lexmark 3000 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Power-On Self Test (POST) Sequence When you turn the printer on it performs a POST. Turn your machine on and check for a correct POST operation by observing the following: 1. The lights come on. 2. The carrier moves. 3. The paper feed gears turn. 4. After 30 seconds the carrier moves over the maintenance sta- tion and caps the printhead. 5. All motors stop and the power light stays on. If your machine completes POST with no errors, go to the 'Error Indicator Table' on page 2-1, locate the symptom and take the indicated action. If your machine does not complete POST, locate the symptom in the following table and take the indicated action. POST Symptom Table Symptom No Power On light and no motors run Power light, but no busy light Paper feed gears do not turn Carrier doesn't move Carrier slams side frame Action Go to the 'Power Service Check' on page 2-11. Replace the system board. Go to the 'Paper Feed Service Check' on page 2-8. Go to the 'Carrier Transport Service Check' on page 2-5. Go to the 'Carrier Transport Service Check' on page 2-5. 2-4