Lexmark 3000 Color Jetprinter Service Manual - Page 18
Envelope Feed Service Check, Perform the 'Paper Feed Service Check'
 |
View all Lexmark 3000 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
FRU 5 Home Position Sensor 6 Maintenance Station Action Unplug the printer and disconnect CN1 from the system board. Plug in the printer and check for 5 V dc between CN1-3 and ground, at the system board. If the voltage is present, replace the home position sensor. If the voltage is not present, replace the system board. A problem with the maintenance station can cause carrier movement problems at the right margin. Go to the 'Maintenance Station Service Check' on page 2-7. Envelope Feed Service Check FRU 1 Envelope Guide Action Be sure the envelope guide has been turned to the envelope load position. Be sure the envelope guide is against the envelopes. Perform the 'Paper Feed Service Check' on page 2-8. 2-6
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
 |
 |
2-6
Envelope Feed Service Check
5
Home Position
Sensor
Unplug the printer and disconnect CN1 from the
system board. Plug in the printer and check for
5 V dc between CN1-3 and ground, at the system
board. If the voltage is present, replace the home
position sensor. If the voltage is not present,
replace the system board.
6
Maintenance
Station
A problem with the maintenance station can cause
carrier movement problems at the right margin. Go
to the ’Maintenance Station Service Check’ on
page 2-7.
FRU
Action
1
Envelope Guide
Be sure the envelope guide has been turned to
the envelope load position.
Be sure the envelope guide is against the
envelopes.
Perform the ’Paper Feed Service Check’ on
page 2-8.
FRU
Action