Lexmark 3000 Color Jetprinter Service Manual - Page 23
Power Service Check, Diagnostic Information 2-11
View all Lexmark 3000 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Power Service Check FRU 1 Power Supply Action Disconnect CN9 from the system board and check the following voltages on the power supply cable: • CN9-1 to GND = +5 V dc • CN9-3 to GND = + 24 V dc If you do not have correct voltage, replace the power supply. Be sure to unplug the machine before you reconnect the power supply to the system board. 2 Printhead Cable Unplug the printer. Disconnect one of the Carrier Home printhead cables and plug in the printer. Look for a Sensor symptom change. Check the failing part for shorts Parallel Cable and replace as necessary. Paper Feed Motor Carrier Transport Repeat this procedure for the carrier home sensor, Motor parallel cable, carrier transport motor and paper feed motor. 3 System Board If the symptom has not changed, replace the system board. Diagnostic Information 2-11