Lexmark 3000 Color Jetprinter Service Manual - Page 26
Carrier Transport
View all Lexmark 3000 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
FRU / Function 7 Carrier Transport 8 Alignment Action Blurred print and voids can be caused by problems in the carrier transport area. Check the following: • Carrier transport belt for wear. • Carrier guide rod for wear or dirt. If dirty, clean and lubricate. • Carrier to carrier frame engagement should be lubricated with grease P/N 1329301. • Idler pulley parts for wear, damage, or looseness. Uneven vertical lines can be adjusted by performing the bidirectional alignment. The user is directed, through the Printer Control program, to perform the bidirectional printing alignment, when replacing a print cartridge. 2-14
2-14
7
Carrier Transport
Blurred print and voids can be caused by problems
in the carrier transport area. Check the following:
•
Carrier transport belt for wear.
•
Carrier guide rod for wear or dirt. If dirty, clean
and lubricate.
•
Carrier to carrier frame engagement should be
lubricated with grease P/N 1329301.
•
Idler pulley parts for wear, damage, or
looseness.
8
Alignment
Uneven vertical lines can be adjusted by
performing the bidirectional alignment. The user is
directed, through the Printer Control program, to
perform the bidirectional printing alignment, when
replacing a print cartridge.
FRU / Function
Action