Lexmark 920dn User's Guide - Page 29
Installing a memorycard, Installing a flashmemory or firmwarecard
UPC - 734646055802
View all Lexmark 920dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing and removing options Installing a memory card Complete the following instructions to install a printer memory card. Note: Memory cards designed for other Lexmark printers may not work with your printer. 1 Remove the system board access cover. (See Removing the system board access cover.) 2 Push open the latches on both ends of the memory card connector. 3 Unpack the memory card. Warning: Printer memory cards are easily damaged by static electricity. Touch something metal such as the printer frame before you touch a memory card. Avoid touching the connection points along the edge of the card. Save the packaging. 4 Align the notches on the bottom of the card with the notches on the connector. 5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place. It may require some force to fully seat the card. Notches 6 Make sure each latch fits over the notch on the end of the card. Installing a flash memory or firmware card Note: Flash memory and firmware cards designed for other Lexmark printers may not work with your printer. 1 Remove the system board access cover (see Removing the system board access cover). Warning: Flash memory and firmware cards are easily damaged by static electricity. Touch something metal, such as the printer frame, before you touch a card. 2 Unpack the flash memory or firmware card. Avoid touching the metal pins on the bottom of the card. Save the packaging. Installing a memory card 29