Lexmark 920dn User's Guide - Page 60
Loading standard trays and optional trays, edges on a level surface.
UPC - 734646055802
View all Lexmark 920dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Printing Loading standard trays and optional trays Your printer has a 550-sheet standard tray. You may have also purchased one or more 550-sheet optional trays. The steps for loading a standard or optional tray are the same. Note: The steps for loading an optional high capacity feeder are different than the steps for loading a 550sheet tray. To load print media: Note: Do not remove a tray when a job is printing or when the operator panel indicator light is blinking. Doing so may cause a jam. 1 Open the tray. 2 Squeeze the side guide tab, and position the guide for the size media you are using. 3 Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the edges on a level surface. 4 Place the print media face down in the tray. For duplex (two-sided) printing on letterhead, place the print media face up in the tray. Note: Do not fill paper above the load line. Overfilling the tray may cause jams. 5 Squeeze the front guide tab, and slide the guide toward the inside of the tray until it lightly rests against the edge of the media. Loading standard trays and optional trays 60