Lexmark E310 User's Guide - Page 16

Using a USB cable, When the Add New Hardware Wizard screen - driver

Get Lexmark E310 - Optra B/W Laser Printer PDF manuals and user guides
UPC - 734646183000
View all Lexmark E310 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Using a USB cable If you are connecting your printer to a PC with a USB (Universal Serial Bus) cable, follow the instructions below. 1 Make sure your computer and printer are turned off. 2 Connect the USB cable to the port on the back of your computer. 3 Connect the other end of the cable to the USB port on the back of your printer. 4 Turn on your computer and your printer. 5 When the Add New Hardware Wizard screen appears: a Select Next to begin searching for new drivers. b Select Next to search for best driver. c At the next screen, deselect the floppy disk drives box and Microsoft Windows update box and select the Specify Location box. d Insert the CD that came with your printer, then select Browse. e Select the letter of your CD drive and highlight the Win98USB folder. f Select OK, Next, Next. g When the hardware is loaded, click Finish. The CD is automatically launched. 6 Follow the installation instructions on the printer drivers screen. 7 Select the LPT1 port as your default printer port. 8 When you are finished, exit the CD. 9 Restart your computer. 6 Chapter 1: The basics

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
6
Chapter 1: The basics
Using a USB cable
If you are connecting your printer to a PC with a USB
(Universal Serial Bus) cable, follow the instructions
below.
1
Make sure your computer and printer are turned
off.
2
Connect the USB cable to the port on the back of
your computer.
3
Connect the other end of the cable to the USB
port on the back of your printer.
4
Turn on your computer and your printer.
5
When the Add New Hardware Wizard screen
appears:
a
Select
Next
to begin searching for new drivers.
b
Select
Next
to search for best driver.
c
At the next screen, deselect the
floppy disk
drives
box and
Microsoft Windows update
box and select the
Specify Location
box
.
d
Insert the CD that came with your printer, then
select
Browse
.
e
Select the letter of your CD drive and highlight
the
Win98USB
folder.
f
Select
OK
,
Next
,
Next
.
g
When the hardware is loaded, click
Finish
.
The CD is automatically launched.
6
Follow the installation instructions on the
printer drivers screen.
7
Select the LPT1 port as your default printer port.
8
When you are finished, exit the CD.
9
Restart your computer.