Lexmark E310 User's Guide - Page 70
Enter Hex Trace mode, to Enter Hex Trace.
UPC - 734646183000
View all Lexmark E310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Enter Hex Trace mode When unexpected characters print or characters are missing, use Hex Trace to help you determine if there is a problem with the language interpreter or the cable. Hex Trace isolates printing problems by telling you what information your printer is receiving. To enter Hex Trace Mode: 1 Turn off the printer. 2 Open the top cover. 3 Turn the printer back on. 4 When the Error light comes on, indicating the top cover is open, do a double button press. 5 When the Error light and Press Button light blink, close the cover. 6 Do a double button press 3 times to scroll down to Enter Hex Trace. When the Enter Hex Trace setting is selected, the operator panel Ready light is on solid, the Data light is on solid, the Error light is blinking and the Press Button light is blinking. 7 Do a long button press to start Hex Trace. Data sent to the printer is printed out in hexadecimal and character representation to help isolate the source of the problem. 8 To exit Hex Trace, turn off the printer or press the operator panel button to reset the printer. 58 Chapter 4: Troubleshooting