Lexmark E310 User's Guide - Page 29

Plug the power cord into the printer., metal clips.

Get Lexmark E310 - Optra B/W Laser Printer PDF manuals and user guides
UPC - 734646183000
View all Lexmark E310 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

When you have finished installing the option card(s): 1 Fit the metal shield into the slots and reattach the screws. 2 Put the printer back to its original upright position. 3 Re-install the print cartridge. 4 Reconnect the computer cable and latch the metal clips. 5 Plug the power cord into the printer. 6 Turn the printer on. As the printer powers up and the operator panel lights begin cycling on and off, there is a pause while the new memory is tested, then the lights continue cycling. 7 When the Ready light comes on, press the operator panel button briefly and print a test page to verify that printer memory or additional flash memory is installed. If the Ready light does not come on, see "Printing problems" on page 36. Installing memory 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
19
Installing memory
When you have finished installing the option card(s):
1
Fit the metal shield into the slots and reattach
the screws.
2
Put the printer back to its original upright
position.
3
Re-install the print cartridge.
4
Reconnect the computer cable and latch the
metal clips.
5
Plug the power cord into the printer.
6
Turn the printer on.
As the printer powers up and the operator panel
lights begin cycling on and off, there is a pause
while the new memory is tested, then the lights
continue cycling.
7
When the Ready light comes on, press the
operator panel button briefly and print a test
page to verify that printer memory or additional
flash memory is installed.
If the Ready light does not come on, see
“
Printing
problems
”
on page 36.