Lexmark E310 User's Guide - Page 43

Loading paper, other media in the manual feeder Use the manual feeder to feed paper or special media, one sheet at a time, into your printer. If you experience problems feeding envelopes or index cards in the automatic paper feeder, try printing them one at a time from the manual feeder. To avoid curling or potential jams when printing on special media, open the front output door to feed media straight out the front of the printer. Manual feeder 1 Extend the paper support on the paper output bin or open the front output door if you're printing on special media. 2 If loading: • paper, insert one sheet of paper with the print side facing you • letterhead paper, insert one sheet of letterhead with the top of the page pointing down, facing you • transparencies with a removable stripe, insert one transparency so the stripe is pointing away from you and pointing down • envelopes, insert one envelope vertically, flap side down so the stamp area is in the top left corner • card stock, insert one card vertically 3 Slide the paper guides flush against the edges of the media. 4 Briefly (approximately one second) push Press Button to start printing. 5 When the Load Paper light blinks and the Press Button light comes on, place another sheet/other media in the manual feeder. If you are using MarkVision, you will get a load manual paper/ envelope message. Loading paper, other media in the manual feeder 31