Lexmark Forms Printer 2590n Lexmark Forms Printer 2500+ Series User's Guide - Page 52
Data options, Paper Handling Options, Buffer
View all Lexmark Forms Printer 2590n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Understanding Setup mode and menu options 52 Paper Handling Options Use the following options to select paper handling option changes, as detailed: • Auto Tear Off - On-Continuous forms automatically advance to the Tear Off bar position. - Off-You can manually advance the perforation of a continuous form to the Tear Off bar position. Note: On is the factory default setting. • Auto Cut Sheet Load - On-Cut sheet paper automatically loads to the current Top‑Of‑Form position. - Off-You must press FormFeed to load paper. Note: On is the factory default setting. • Auto Sheet Feeder On-Automatically loads paper if the optional Auto Sheet Feeder is installed. Note: Off is the factory default setting. • Form Length This option lets you set the form length (in lines per page) from one line to a maximum of 22 inches. • Left Margin This option lets you set the left margin to any inch increment from 0" to 3". • Right Margin This option lets you set the right margin to any inch increment from 4" to 8". If you have a wide carriage model, the maximum right margin is 13.6". • Lines Per Inch Lets you specify the number of text lines in an inch from 3 to 6. Note: 6 is the factory default setting. • Eject by FF - On-Lets you eject loaded cut sheet paper by pressing FormFeed. Note: On is the factory default setting. Data options Note: Use Setup mode to configure the printer according to your needs. To print a list of all default settings, press LineFeed from the Main menu. The following items outline and explain the Data options and settings you can use with the printer: Buffer • Minimum-This sets the receive buffer size to zero. • Maximum-For 2580+ or 2581+ models, this sets the receive buffer size to 64KB or 480KB, depending on whether NLQ II (Near Letter Quality) Download is enabled. • Maximum-For 2590+ or 2591+ models, this sets the receive buffer size to 47.5KB or 480KB, depending on whether Download is enabled. Note: Maximum is the factory default setting.