Lexmark MX410 Quick Reference - Page 15

2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, navigate to: FTP > FTP Address > type the FTP address > > Scan It Scanning to an FTP address using a shortcut number 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the printer control panel, press # on the keypad, and then enter the FTP shortcut number. 4 Touch Scan It. Scanning to a computer or flash drive Scanning to a computer using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Scan Profile > Create Scan Profile. 3 Select your scan settings, and then click Next. 4 Select a location on your computer where you want to save the scan image. 5 Type a scan name, and then a user name. Note: The scan name is the name that appears in the Scan Profile list on the display. 6 Click Submit. Note: Clicking Submit automatically assigns a shortcut number. You can use this shortcut number when you are ready to scan your documents. 7 Review the instructions on the Scan Profile screen. a Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. b If you are loading a document into the ADF tray, then adjust the paper guides. c Do either of the following: • Press #, and then enter the shortcut number using the keypad. • From the home screen, navigate to: Held Jobs > Profiles > select your shortcut on the list Note: The scanner scans and sends the document to the directory you specified. 8 View the file from the computer. Note: The output file is saved in the location or launched in the program you specified. Scanning to a flash drive 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 Insert the flash drive into the USB port on the front of the printer. 15 Note: The USB Drive home screen appears. 4 Select the destination folder, and then touch Scan to USB drive. Note: The printer goes back to the home screen after 30 seconds of inactivity. 5 Adjust the scan settings, and then touch Scan It. Clearing jams By carefully selecting paper and specialty media and loading it properly, you should be able to avoid most jams. If jams occur, then follow the steps outlined in this chapter. Warning-Potential Damage: Never use any tool to remove a jam. Doing so could permanently damage the fuser. Avoiding jams Load paper properly • Make sure paper lies flat in the tray. Correct loading of paper Incorrect loading of paper • Do not remove a tray while the printer is printing. • Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it. • Do not load too much paper. Make sure the stack height is below the maximum paper fill indicator.