Lexmark S315 Quick Reference - Page 15
Maintaining ink cartridges, Aligning the printhead
View all Lexmark S315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Ordering and replacing ink cartridges 3 Press the release tab, and then remove the used ink cartridge or cartridges. 1 2 15 2 Insert each ink cartridge. Slide your finger along the ink cartridge until the cartridge clicks into place. 3 Installing ink cartridges 1 Remove the ink cartridge from the pack, and then remove the protective cap from the ink cartridge. If your ink cartridge comes with a twist cap, then remove the cap. 1 2 3 1 2 Notes: • Insert the color cartridges first, and then the black cartridge. • Insert the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air. 3 Close the printer. Maintaining ink cartridges In addition to the following tasks that you can perform, your printer performs an automatic maintenance cycle every week if it is plugged into a properly grounded, working electrical outlet. It will briefly come out of Sleep mode or will temporarily turn on if it is turned off. Aligning the printhead If the characters or lines on your printed image appear jagged or wavy, then you may need to align the printhead. 1 Load plain paper. 2 From the printer control panel, navigate to: > Setup > OK >Maintenance > OK > Align Printer > OK An alignment page prints. Note: Do not remove the alignment page until printing is finished.