Home » Lexmark Manuals » Printers » Lexmark S315 » Manual Viewer

Lexmark S315 Quick Reference - Page 8

highlighted on the display, and then press, Extend the paper exit tray. - power cord

Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

About your printer 10 Extend the paper exit tray. 2 1 11 Connect the power cord only. Note: Do not attach the USB cable yet. 1 2 8 12 Make sure the printer is on. 13 Using the printer control panel, press the up or down arrow button until the language you want is highlighted on the display, and then press OK . 14 Confirm the language, and then press OK . Language Selection You have chosen English as the language for your Printer Are you sure? Yes No

Section	Page
Contents	3
About your printer	4
Finding information about the printer	4
Minimizing your printer's environmental impact	4
Printer models	5
Printer features	5
Setting up the printer	5
Understanding the parts of the printer	11
Using the printer control panel	12
Using flash drives	13
Supported file types	13
Using a flash drive with the printer	13
Ordering and replacing ink cartridges	14
Ordering ink cartridges	14
Replacing ink cartridges	14
Maintaining ink cartridges	15
Aligning the printhead	15
Cleaning the printhead nozzles	16
Using the printer software	17
Minimum system requirements	17
Installing the printer software	17
Using the Windows printer software	17
Using the Macintosh printer software	18
Printing	20
Printing a document	20
Printing on both sides of the paper (duplexing) automatically	20
Printing photos from a flash drive	21
Canceling print jobs	21
Printing from a mobile device	21
What is LexPrint?	21
Supported printers	21
Copying	22
Tips for copying	22
Making copies	22
Making a two-sided (duplex) copy automatically	22
Canceling copy jobs	23
Scanning	24
Tips for scanning	24
Scanning to a local computer	24
Scanning to a flash drive or memory card	24
Scanning directly to e-mail using the printer software	24
Scanning to a PDF	25
Canceling scan jobs	25
E-mailing	26
Sending e-mail	26
Tips for e-mailing	26
Setting up the e-mail function	26
Canceling an e-mail	26
Wireless networking	27
Information you will need to set up the printer on a wireless network	27
Installing the printer on a wireless network	27
What is Wi-Fi Protected Setup?	27
Configuring Wi-Fi Protected Setup manually	28
Use the Push Button Configuration (PBC) method	28
Use the Personal Identification Number (PIN) method	28
Troubleshooting	29
Before you troubleshoot	29
If Troubleshooting does not solve your problem	29
Setup troubleshooting	29
Installation screen did not appear during installation	29
Launch the printer CD manually	29
Incorrect language appears on the display	29
Change the language using the printer menus	29
Software did not install	29
Make sure that your computer meets the minimum system requirements	29
Temporarily disable security programs in Windows before installing the software	29
Check the USB connection	30
Reconnect the printer power supply	30
Print job does not print or is missing pages	30
Make sure the ink cartridges are inserted correctly	30
Select your printer from the Print dialog before sending the print job	30
Make sure the print job is not paused	30
Make sure your printer is set as the default printer	30
Reconnect the printer power supply	30
Remove and reconnect the USB cable connected to your printer	30
Check the USB connection	30
Remove and reinstall the printer software	30
Printer is printing blank pages	30
Reinstall the ink cartridges and deep clean and align the printhead	30
Printer is busy or does not respond	31
Make sure the printer is not in Sleep mode	31
Reconnect the printer power supply	31
Cannot delete documents from the print queue	31
Restart the computer and try again	31
Remove and reconnect the USB cable connected to your printer	31
Cannot print through USB	31
Check the USB connection	31
Make sure the USB port is enabled in Windows	31
Remove and reinstall the printer software	31
Wireless network troubleshooting	32
Wireless troubleshooting checklist	32
Printing a network setup page	32
Locating IP addresses	32
Cannot print over wireless network	32
Turn the access point (wireless router) off and then back on	32
Disconnect from VPN session	33
Make sure Demo Mode is turned off	33
Check your WEP key or WPA passphrase	33
Check if your access point has an association/registration button	33
Move your access point away from other electronic devices	33
Move the computer and/or printer closer to the access point	33
Check the wireless signal quality	33
Check your advanced security settings	33
Make sure your computer is connected to your access point	33
Make sure that your computer and printer are connected to the same wireless network	33
Make sure your OS is compatible with wireless printing through AirPort	34
“Communication not available” message appears when printing wirelessly	34
Make sure your computer and printer have valid IP addresses for the network	34
Make sure the wireless port is selected	35
Make sure bidirectional communication is enabled	35
Notices	36
Edition notice	36
UNITED STATES GOVERNMENT RIGHTS	36
Trademarks	36
Federal Communications Commission (FCC) compliance information statement	36