Lexmark T620 Technical Reference - Page 237

4-70 PostScript Table 4-12: Page Device Parameters (Continued) Key SlipSheetDetails Staple TraySwitch Tumble Type dictionary integer boolean boolean Definition Specifies the following two unique separator sheet parameters: SlipSheetSource and Type. SlipSheetSource is an integer type parameter which identifies the source used for separator sheets. Supported values are: Null Use current source (default) 0 Tray 1 1 Tray 2 2 Envelope Feeder 3 Tray 3 4 Multipurpose feeder 5 Tray 4 6 Tray 5 The key is found in the DeviceRenderingInfo dictionary within pagedevice. It can be altered using a setpagedevice operator. /SlipSheetDetails > >> setpagedevice Type is a constant value. To find the value of Type for your printer, see Table C-2 on page C-5. Specifies whether to staple the current print job. Supported values are: 0 Do not staple print job. 1 Staple each set in the front position. 2 Staple each set in the rear position. 3 Staple each set according to the Auto setting. 4 Staple each set in the dual position. The format for setting the Staple key is: setpagedevice Indicates tray linking is always active. When the media in one input source is depleted, other input sources are searched to determine if the same media can be found in another source. If another source is found, the alternate source is selected. The media in both input sources must be the same size and type for tray linking to occur. Indicates the orientation of the second side of a duplexed page with respect to the first side. Supported values are: True False Causes pages to print as if they are to be bound across the top of the page (image is rotated 180 ° on the back side of the page) Causes pages to print as if they are to be side bound (as in a book)