Lexmark W820 Service Manual - Page 155
Mount the Cover-Top, Front and Cover-Top, Rear.
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
4025-Finisher Replacement 1. Insert the Flange and Gear into the Finisher, and secure it with an E-ring. 2. Insert the Gear into the shaft of the Roll Assembly-REGI. 3. Engage the belt on the right side of the Drive Assembly to the Gear, and also engage the belt on the left side of the Drive Assembly to the Gear. 4. Align the Drive Assembly with the mounting position in the Finisher, and secure it with three screws. 5. Insert the Gear into the shaft of the Roll Assembly-REGI, securing it with an E-ring. 6. Engage the belt of the Gear and Belt Assembly to the Gear, and align the Gear and Belt Assembly with the mounting position in the Finisher, then secure it with three screws. 7. Clamp the harness at six places on the Drive Assembly. 8. Mount the Cover-Rear. 9. Mount the Cover-Top, Front and Cover-Top, Rear. 10. Mount the Cover-Jogging. Removal and Replacement Procedures 4-47