Lexmark W820 Service Manual - Page 227
Sensor Tray Height Front Removal
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
4025-Finisher Sensor Tray Height Front Removal Removal 1. Remove the Cover-Jogging. 2. Remove two screws that secure to the Finisher from the Sensor Tray Height Front, and pull off the Sensor Tray Height Front a little. 3. Unplug the connector (P/J 1C-L) of the Harness Sensor from the Sensor Tray Height Front. 4. For the rear, perform the above step in the same manner. Replacement 1. Plug the connector (P/J 1C-L) of the Harness Sensor to the Sensor Tray Height Front. 2. Align the Sensor Tray Height Front with the mounting position in the Finisher, and secure it with two screws. 3. For the rear, perform the above step in the same manner. 4. Mount the Cover-Jogging. Removal and Replacement Procedures 4-119
Removal and Replacement Procedures
4-119
4025-Finisher
Sensor Tray Height Front Removal
Removal
1.
Remove the Cover-Jogging.
2.
Remove two screws that secure to the Finisher from the Sensor Tray Height Front,
and pull off the Sensor Tray Height Front a little.
3.
Unplug the connector (P/J 1C-L) of the Harness Sensor from the Sensor Tray Height
Front.
4.
For the rear, perform the above step in the same manner.
Replacement
1.
Plug the connector (P/J 1C-L) of the Harness Sensor to the Sensor Tray Height
Front.
2.
Align the Sensor Tray Height Front with the mounting position in the Finisher, and
secure it with two screws.
3.
For the rear, perform the above step in the same manner.
4.
Mount the Cover-Jogging.