Lexmark W820 Service Manual - Page 226
Blade Assembly Removal, the Blade Assembly engages with the hole on the rear of the Finisher
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
4025-Finisher Blade Assembly Removal Removal 1. Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover. 2. Remove two screws on the front that secure to the Finisher from the Blade Assembly, and pull off the Blade Assembly toward the front. Replacement 1. Align the Blade Assembly with the mounting position so that the boss on the rear of the Blade Assembly engages with the hole on the rear of the Finisher, and secure it with two screws. 2. Mount the Cover-Open, Front, Cover-Front and Kit Stud Cover. 4-118 Service Manual
4-118
Service Manual
4025-Finisher
Blade Assembly Removal
Removal
1.
Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover.
2.
Remove two screws on the front that secure to the Finisher from the Blade
Assembly, and pull off the Blade Assembly toward the front.
Replacement
1.
Align the Blade Assembly with the mounting position so that the boss on the rear of
the Blade Assembly engages with the hole on the rear of the Finisher, and secure it
with two screws.
2.
Mount the Cover-Open, Front, Cover-Front and Kit Stud Cover.