Lexmark W820 Service Manual - Page 187
Remove the Sensor Assembly.
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
4025-Finisher Sensor, Exit Path Removal Removal 1. Remove the Cover-Jogging. 2. Remove the Cover-Top, Front and Cover-Top, Rear. 3. Remove the Sensor Assembly. 4. Unplug the connector (P/J 5) of the Harness Exit from the Sensor. 5. Unhook the Sensor at three places, and remove the Sensor. Replacement 1. Align the Sensor with the mounting position in the Compiler Guide to secure it. 2. Plug the connector (P/J 5) of the Harness Exit to the Sensor. 3. Mount the Sensor Assembly. 4. Mount the Cover-Top, Front and Cover-Top, Rear. 5. Mount the Cover-Jogging. Removal and Replacement Procedures 4-79
Removal and Replacement Procedures
4-79
4025-Finisher
Sensor, Exit Path Removal
Removal
1.
Remove the Cover-Jogging.
2.
Remove the Cover-Top, Front and Cover-Top, Rear.
3.
Remove the Sensor Assembly.
4.
Unplug the connector (P/J 5) of the Harness Exit from the Sensor.
5.
Unhook the Sensor at three places, and remove the Sensor.
Replacement
1.
Align the Sensor with the mounting position in the Compiler Guide to secure it.
2.
Plug the connector (P/J 5) of the Harness Exit to the Sensor.
3.
Mount the Sensor Assembly.
4.
Mount the Cover-Top, Front and Cover-Top, Rear.
5.
Mount the Cover-Jogging.