Home » Lexmark Manuals » Multifunction Devices » Lexmark X864 » Manual Viewer

Lexmark X864 IPDS Emulation User's Guide - Page 29

Print Resource List, 3.3.19 Trace Functions, 3.3.20 IPDS Version, Disable, USB Std. Output

Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

3.3.18 Print Resource List This option prints a list of the following resources: • All resident fonts • All captured bitmap, Type 1 and TrueType fonts • All captured data objects (Refer to "RESOURCE CAPTURE Menu Options" on page 45 on how to enable Resource Capture.) Yes Print IPDS resource list. No Do not print IPDS resource list. Printing an IPDS resource list will delete any IPDS resources stored in the printer memory. A "Printer Reset" Nack will be returned to the host and the resources will be downloaded again. Note: This function can not be operated remotely. 3.3.19 Trace Functions This option determines if the Trace function is enabled. Trace data is sent to the selected port. This option is usually only operated by service personnel for trouble shooting purposes. When this feature is enabled, the IPDS emulation will attempt to make contact with an externally connected trace program, which is provided for technical service only. Enabling this option without having a computer running the trace program attached to the port selected to receive the trace data, the printer may hang with IPDS or BUSY displayed. Print performance may be degraded when the trace function is active. During printing the front panel will indicate that the Trace Function is active. Disable* USB Std. Output Disable Trace. Enable the standard USB port (port on rear of printer) for trace data output. Note: This function can not be operated remotely. 3.3.20 IPDS Version This option displays the current IPDS firmware version / level. Note 1: This option can not be used remotely. Note 2: The IPDS level is also shown on the printed Menu Settings Page. It is found as "IPDS Emulation" under the Device Information heading. See Printing the Menu Settings Page (printers) on page 14 or Printing the Menu Settings Page (MFPs) on page 17. 29

Section	Page
Home	1
Notice	2
Trademarks and Credits	2
Introduction	7
1.1 About This Guide	7
1.2 Equipment Requirements and Specifications for IPDS Emulation Printing	7
1.3 Customer Support	8
1.4 Conventions Used in the Manual	9
2 Using the Operator Panel or Touch Screen for IPDS MENU Setup	10
2.1 IPDS MENU Setup Options vs. Printer Setup Options	10
2.2 Changing IPDS Settings Using the Operator Panel	11
2.2.1 Accessing the IPDS MENU	11
2.2.2 Example: Selecting a New Value as a Setting	11
2.2.3 Example: Changing a Numerical Setting	13
2.2.4 Saved Option Changes Become Active on New Session	14
2.2.5 Printing the Menu Settings Page (printers)	14
2.3 Changing IPDS Settings Using the MFP Touch Screen	15
2.3.1 Accessing the IPDS MENU	15
2.3.2 Example: Selecting a New Value as a Setting	15
2.3.3 Example: Changing a Numerical Setting	16
2.3.4 Saved Option Changes Become Active on New Session	17
2.3.5 Printing the Menu Settings Page (MFPs)	17
3 Setup Operations Reference	18
3.1 IPDS MENU - Map of All Options	18
3.2 IPDS MENU – Default Values Overview	19
3.2.1 Emulation	19
3.2.2 Paper Handling	19
3.2.3 MAP Input Trays	19
3.2.4 Map Output Bins	20
3.2.5 Margins	20
3.2.6 Resource Capture	20
3.3 EMULATION – Options Descriptions	21
3.3.1 IPDS Emulation	21
3.3.2 Host Resolution	21
3.3.3 Color Processing	22
3.3.4 Toner Saver	22
3.3.5 BAR CODE	22
3.3.5.1 Bar Code Symbol	22
3.3.5.2 Bar Code Size	23
3.3.6 DEFAULT CODEPAGE	23
3.3.7 Codepage Version	24
3.3.8 DEFAULT FGID	24
3.3.9 Default CPI	24
3.3.10 Printable Area	24
3.3.11 Exception Control	25
3.3.12 Font Control	26
3.3.13 Font Style	26
3.3.14 IPDS Print Res	26
3.3.15 Intervention Required	27
3.3.16 IPDS Timeout	27
3.3.17 Fax Interrupt	28
3.3.18 Print Resource List	29
3.3.19 Trace Functions	29
3.3.20 IPDS Version	29
3.4 PAPER HANDLING Menu – Option Descriptions	30
3.4.1 Offset Stacking	30
3.4.2 UNIVERSAL SIZE	30
3.4.3 OTHER ENV SIZE	32
3.5 MAP INPUT TRAYS Menu Options	34
3.6 MAP OUTPUT BINS Menu Options	37
3.6.1 Descriptions of Output Bin Values	37
3.6.2 Descriptions of IPDS Bin Selection Numbers	38
3.6.3 Default Bin Mapping	38
3.7 MARGINS Menu Options	39
3.7.1 ALL INPUT TRAYS	41
3.7.2 TRAY 1 ADJUST	41
3.7.3 TRAY 2 ADJUST	41
3.7.4 TRAY 3 ADJUST	42
3.7.5 TRAY 4 ADJUST	42
3.7.6 TRAY 5 ADJUST	43
3.7.7 MP FEEDER ADJUST	43
3.7.8 ENV FEEDER ADJ	43
3.7.9 MANUAL PAPER ADJ	44
3.7.10 MANUAL ENV ADJ	44
3.8 RESOURCE CAPTURE Menu Options	45
3.8.1 Storage Media	45
3.8.2 Resources Captured	46
3.8.3 Remove Resources	46
4 Duplex Printing Using Preprinted Media	47
5 Finishing Support	48
5.1 Offset Stacking	50
5.1.1 AS/400 and iSeries Offset Stacking	50
5.1.2 Mainframe Offset Stacking	51
5.2 Stapling	52
5.2.1 AS/400 and iSeries Stapling	52
5.2.1.1 Lexmark T650, T652, T654 and X658de MFP Optional Finisher	53
5.2.1.2 Lexmark W850, X860de, X862de and X864de Optional Standard Finisher	54
5.2.1.3 Lexmark X860de, X862de and X864de MFPs Optional Advanced Finisher Functions	56
5.2.2 Mainframe Stapling	58
5.2.2.1 Lexmark T650, T652, T654, T656dne and X658de Optional Finisher	58
5.2.2.2 Lexmark W850, X860de, X862de and X864de Optional Standard Finisher	59
5.2.2.3 Lexmark X860de, X862de and X864de MFPs Optional Advanced Finisher Functions	60
5.3 Hole Punching	61
5.3.1 Hole Punching From an Input Source	61
5.3.2 Hole Punching to an Output Bin	62
6 IPDS Job Cancel	63
6.1 Canceling IPDS Jobs	63
6.2 How to Cancel a Job Using the Printer Operator Panel	63
6.3 How to Cancel a Job Using the MFP Touch Screen	64
7 Working with Captured Resources	65
7.1 Capture Resource and Remove Resources	65
7.2 Preparing Fonts for Capture	65
7.2.1 Capturing Fonts from an AS/400 or iSeries	66
7.2.1.1 Enabling Font Capture on the Printer	66
7.2.1.2 Program Requirements	66
7.2.1.3 Making Bitmap LF1 and Outline LF3 font Fonts Eligible for Capture on an iSeries host	66
7.2.1.4 Making TrueType Fonts eligible for Capture on an iSeries host	66
7.2.2 Capturing Fonts from a Mainframe Host	67
7.2.2.1 Enabling Font Capture on the Printer	67
7.2.2.2 Mainframe Program Requirements	67
7.2.2.3 Making Bitmap LF1 and Outline LF3 font Fonts Eligible for Capture on a Mainframe	67
7.2.2.4 Making TrueType Fonts eligible for Capture on mainframe	70
7.3 Preparing Data Objects (non-font resources) for Capture	70
7.3.1 Capturing Data Objects from an IBM Host	70
7.3.1.1 Enabling Data Object Capture on the Printer	70
7.3.1.2 Making Data Objects Eligible for Capture on the Host	70
8 Remote Configuration of Printer IPDS Settings	71
8.1 Why Use a Browser	71
8.2 Remote Configuration Using a Browser	71
8.3 Functions that Can Not be Operated Remotely	72
9 Printer Messages and Problems	73
10 Command Reference	74
10.1 XOA Print Quality Control	74
10.2 XOH OPC Product Identifier Self Defining Field	75
10.3 Finishing Operations Self-Defining Field	76
10.4 N-up Printing	77
10.5 Color and Simulated Grey Scale Printing	77
10.6 TrueType/OpenType Fonts	77
10.7 Object Container Support	77
10.8 Media Reporting by Object ID (OID)	78
11 Warranty	80
Appendices	81
A. Technical Specifications	82
A.1 IPDS/SCS Feature Overview	82
A.2 Host Software Compatibility Overview for IPDS Printing	82
B. Font and Code Page Information	83
B.1 International Language Definitions	83
B.1.1 Latin 1	83
B.1.2 Latin 2/ROECE, Latin 3, Latin 4, Latin 5	83
B.1.3 Cyrillic and Greek	84
B.1.4 Arabic and Hebrew	84
B.1.5 Japanese (non-Latin)	84
B.2 About the Three Types of Supported Font Sets	84
B.3 Compatibility Font Sets	85
B.3.1 4028 Compatibility Font Set - (Resident Emulation)	85
B.3.2 3812/3816 Compatibility Font Set	87
B.4 IBM Core Interchange Scalable Font Set	89
B.5 IBM Core Interchange Font Set Code Page Support	90
B.5.1 Latin 1 Country Extended Code Pages	90
B.5.2 Latin 1 EBCDIC Publishing Code Pages	91
B.5.3 Latin 1 ASCII Code Pages	91
B.5.4 Latin 2, 3, 4, 5, and 9 Code Pages	91
B.5.5 Latin EBCDIC DCF Code Pages	92
B.5.6 Cyrillic and Greek Code Pages	92
B.5.7 Arabic Code Pages	93
B.5.8 Hebrew Code Pages	93
B.5.9 Symbol Code Pages	93
B.6 IBM Coordinated Font Set	94
B.6.1 OCR Scalable Font Set	94
B.7 POSTNET Font Support	95
B.8 Font Substitution	96
B.8.1 Resident Emulation Font Substitution	96
B.8.2 3812/3816 Emulation Font substitution	97
C. Bar Code Support: Linear (1-D) Bar Codes	98
D. Bar Code Support: 2-D Bar Codes	106
D.1 Data Matrix Special Function Parameter Support	107
D.2 MaxiCode Special Function Parameter Support	108
D.3 PDF417 Special Function Parameter Support	108
D.4 QR Code (Quick Response Code)	108
E. Printing DBCS Characters	110
F. Memory Requirements and Recommendations	111