Lexmark X864 IPDS Printer and Host Setup Guide - Page 37

IPDS Printer and Host Setup Guide Printer Messages and Problems Problem 1: Fatal error in print queue; incorrect Busy / Timeout The print queue stops with a fatal error which requires operator intervention or the printer displays Busy or IPDS even when no IPDS jobs are printing. Solution to Problem 1 The host still has control of the printer. You need to adjust the Network Job Timeout on the printer, the printer IPDS Timeout value, the host port value, or the appropriate timer/timeout value on your IPDS host. You may have to adjust a combination of these to solve the problem. IPDS Timeout = Host Controlled If you selected the IPDS Timeout value of Host Controlled in order to allow the host to directly control ending (disconnecting) a LAN session, correct the appropriate host timer/timeout value as shown below. PSF/400 with OS/400 V3R1 or V3R6 WRKAFP2: Inactivity Timer (INACTTMR) PSF/400 with OS/400 V3R2, V3R7, V4R1-R5, or V5R1-R4 or greater CRTPSFCFG: Release Timer (RLSTMR) PSF/MVS PSF Startup Proc: Disconnect Interval (DISCINTV) PSF/2 TCP/IP Settings: Connect Timeout Tuning Option: Job Interval Shutdown Timer PSF/AIX SMIT Printer Def: Connect Timeout *SEC15 or *SEC30 *SEC15 or *SEC30 15 seconds 30 seconds 30 seconds 30 seconds IPDS Timeout = 15 seconds to 10 minutes If you selected an IPDS Timeout value of 15 seconds to 10 minutes in order to allow the printer IPDS emulation to determine when an IPDS LAN session times out, correct the appropriate host timer/timeout value as shown below. PSF/400 with OS/400 V3R1 or V3R6 WRKAFP2: Inactivity Timer (INACTTMR) PSF/400 with OS/400 V3R2, V3R7, V4R1-R5, or V5R1-R4 or greater CRTPSFCFG: Release Timer (RLSTMR) PSF/MVS PSF Startup Proc: Disconnect Interval (DISCINTV) *NOMAX *NOMAX 0 37