Lexmark Z1420 Getting Started - Page 35
does not print, Reconnect the power supply, Uninstall and reinstall software, Check messages - ink cartridges
UPC - 734646022750
View all Lexmark Z1420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer. The USB port is marked with the USB symbol. Reconnect the power supply 1 Press to turn the printer off. 2 Disconnect the power cord from the wall outlet. 3 Gently remove the power supply from the printer. 4 Reconnect the power supply to the printer. 5 Plug the power cord into the wall outlet. 6 Press to turn the printer on. Uninstall and reinstall software Uninstall the printer software, and then reinstall it. For more information, see "Uninstalling and reinstalling the software" on page 50. Page does not print These are possible solutions. Try one or more of the following: Check messages If an error message is displayed, see "Error messages" in the "Troubleshooting" chapter of the User's Guide on the CD. Check power If the light is not on, see "Power button is not lit" on page 34. Reload paper Remove and then load paper. Check ink Check the ink levels, and install new print cartridges if necessary. Check print cartridges 1 Remove the print cartridges. 2 Make sure the sticker and tape have been removed. 3 Reinsert the cartridges. 1 2 35