LiftMaster Dial Code Dial Code VF Series Manual - Page 16

MEMORY CARD INSTALLATION A. Turn power on and insert Memory Card into Main Memory Card Slot (Main Memory Card in back slot, Backup Memory Card in front slot.) (fig a.) Push it all the way in until card "snaps" into place and the release button pops up. The screen should display the "Welcome Screen" (fig b.) B. If the screen continues to display the "Insert Memory Card" screen (fig c.) then Eject memory card by pressing the corresponding release button down and reinsert Memory Card into main slot (fig d.). Otherwise continue with programming. TOP VIEW OF PROCESSOR MAIN MEMORY CARD (fig a.) BACK BACKUP MEMORY CARD POWER SWITCH FRONT welcome to elite entry phone (fig b.) insert memory card IN MAIN SLOT (fig c.) (fig d.) VIEWING THE SOFTWARE VERSION A. To view the memory capacity of the system or to view the software version currently running on the system in operation an information screen is accessible on all Dial Code systems for easy reference. Turn power off and insert Memory Card in Main Memory Slot. Turn power on and the information screen should display as seen in (fig e.) MEMORY CAPACITY DIAL CODE VF-250 REV. 1.00_ (fig c.) SOFTWARE VERSION NUMBER PAGE 15