LiftMaster Dial Code Dial Code VF Series Manual - Page 20

TENANT INFORMATION 1 STEP In the Program Selection Screen (fig a.), Press the N key. The screen will display (fig b.): SELECT PROG MODE: PROG A NEW NAME N (N)names (U)utility PROG BY CODE:___ (fig a.) (fig b.) 2 STEP You now have three options: To program by name, press To program by code, enter To view or edit an existing name the N key and the first OR a three digit code* and press OR or code, use the empty code will display. the key. keys to scroll through Directory. * The unit will only accept codes within it's range - depending on memory capacity. 3 STEP Type in the desired Tenant name, LAST name first, followed by the first name (fig c.). If the code you have selected is already used, there will be a name already. You can edit the name by simply typing over it. Press the key to complete the entry. You may also use the keys to move the cursor within a code. Tenant code 005 LastNAME,First jones, robert_ 005 PHONE NUMBER: _-___-496-2634 Tenant name (example - fig c.) (example - fig d.) 4 STEP Type in the desired Tenant phone number (fig d.). If you need to enter an area code refer to the next page. Press the key to complete the entry. The KEY CODE screen will be displayed. (example - fig e.) 5 STEP An individual six digit Tenant Key code may be assigned to each tenant . Tenants can use their Key Code to access the premises. 005 KEY CODE: 005123 Assignment of Tenant Key Codes is optional. The first three digits of the Key Code is the assigned Directory Code. Assign the last three digits (numeric characters only) to create an individual Key Code. If using the RF card, proceed to Step 6 (fig e). Press the key. Continue entering Tenants in the Directory or press the key to return to the Program Selection Screen. PAGE 19