Linksys LNE100TX User Guide - Page 19

Linksys Instant EtherFast® Series 6. After ensuring that all of the listed network components are installed on your system, in the Primary Network Logon box select Client for Microsoft Networks . 7. Click on the Identification tab. Type the name of your computer in the Computer Name box. Choose a name that is unique from the other com- puter names on the network. Note: Your Computer and Workgroup Names must both be fewer than 15 characters, and should only consist only of numbers and letters. EtherFast® 10/100 LAN Cards 9. Enter a description of your computer in the Computer Description box. This box is optional, and can be left blank. 10. Choose the Access Control tab. Ensure that Shared-level access control is selected. 8. Type the name of your workgroup in the Workgroup box. The Workgroup name should be the same Workgroup Name in use by all of the other PCs on the network. Use the same Workgroup Name that is in use on your other computers for ease of use. Do NOT click the OK button when you are done. 31 11. Click the OK button. Your system may ask you for your Windows Millennium CD-ROM or the location of the Windows Millennium installation files. If it does, direct Windows to the appropriate location, (i.e., D:\win9x if you have the Windows Millennium CD-ROM, or C:\windows\options\install). 12. Once Windows has copied the necessary files, the System Settings Change window appears. Remove all disks from your PC and click Yes to restart your PC. If you don't see this window restart your PC. Remember to remove any installation disks or CD-ROMs prior to rebooting. 32